#OLD GENERAL ELECTRIC 200 AMP ARC WELDER WISCONSIN ENGINE MANUAL#

This is according to their latest product manual found on their site. Generally, stick welder breaker size is around 50-60A breaker rating, but in this case, the manufacturer specifications dictate that a 60A breaker would be best for the AC 225 Arc Welder. This is to prevent the wirings from overheating due to the large power draw of the welder. As a general rule, the breakers and the wires should match their ratings. Also, going with a higher-rated breaker ensures that the wiring would not be an issue.

If you would ask if there would be a significant difference between the 50amp breaker and the 60amp one, it is sometimes insignificant depending on the use case for both breakers.īut to err on the side of caution, I would recommend going for the higher-rated breaker.

The AC225 is rated at 230 and 220 volts depending on the specific model. I should also note that before anything else, measure the voltage coming out of your wires. Hence, some users of the arc welder took to the forums to recommend a higher amp breaker to prevent tripping. Still, to the professionals, welding thick materials would create a problem. This is true when the welder is pulling its max power, which would not create an issue in the case of the DIY warrior. The K1290 model has an Input Current at Rated output to 63A. Based on my research, the manufacturer discretely recommends a 60A breaker for a specific model of the AC225. Well, we’ve all been there before, the manufacturer has some basic requirements for their product, but you, as a savvy consumer, would want to save on a few extra dollars, right?įor that, I should say that the manufacturer has its products designed with reliability in mind.

Old general electric 200 amp arc welder wisconsin engine